HobbyWireless
TX-V905 500MW 900 MHZ PLUG AND PLAY TRANSMITTER.
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, This is an easy to use plug and play transmitter only, part of our FPV905 plug and play system., The plug and play board has lots of important features built-in such as:, , Channels:, CH1 910 MHz (USA), Features:, * 500mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV905 PLUG AND PLAY 900MHZ 500MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, The FPV905 transmitter can be powered through a JST connector using any DC power source from 10.5 to 13 volts (note: a 3s 11.1v lithium polymer battery can be used to power the system), Package includes:, - R900 high sensitivity receiver, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV905 complete Audio ...HobbyWireless
FPV-PRO905 KIT 500MW 900MHZ DOUBLE RECEPTION - BEST 900 MHZ SYSTEM - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., For patch antennas position: Place each antenna opposing each other (back to back) pointing 45° or less towards the sky and your video reception will be fully covered front, above and behind., The plug and play board main features:, , Package includes:, - 1x Plug and Play transmitter 500mW 900MHzwith built-in microphone with, Specifications:, , Notes:, - The transmitter will have only the channel 1 (910 MHz) available to USA users to comply with FCC rules., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
TX-V1012 1000MW 1.2GHZ PLUG AND PLAY TRANSMITTER - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 40g (transmitter only) |
Details:, This is a plug and play transmitter only, part of our FPV1012 plug and play system., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV512 PLUG AND PLAY 1.2GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| - Transmitter Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, , The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, - Transmitter 1.2Ghz 500mW, :, CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
(We can't ship this item to US address, because the ...HobbyWireless
FPV313 PLUG AND PLAY 1.3 GHZ 300MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
| battery, (note | a 3s 11.1v lithium polymer battery can be used to power the system) |
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:-, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 1.280GHz (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV313 complete Audio ...HobbyWireless
FPV1012 PLUG AND PLAY 1.2GHZ 1000MW WIRELESS SYSTEM - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...HobbyWireless
FPV-PRO1012 KIT 1000MW 1.2 GHZ DOUBLE RECEPTION - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 1.2 GHz 1000mW with built-in microphone with, Specifications:, Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
FPV1024 PLUG AND PLAY 2.4GHZ 1000MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, , Note:, We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles, Package includes:, , Specifications:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This system uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV-PRO1024 KIT 1000MW 2.4GHZ + DIVERSITY RECEIVER DOUBLE RECEPTION - LAWMATE - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, , This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., The plug and play board has lots of important features built-in such as:, , Package includes:, - 1x Plug and Play transmitter 2.4 GHz 1000mW with built-in microphone (USA customers only channel 1 is available. It does not affect the performance of the transmitter), Specifications:, Note:, If you are not going to run your RC model, do not turn this transmitter on and leave it on for several minutes, it can overheat damaging the unit! It is 1000mW transmitter in a tiny metal box!!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you're looking for a rock solid FPV system with ...HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM MAIN BOARD ONLY - NO GPS ANTENNA OR CURRENT SENSOR
| Voltage | 2 ports |
| Current | 1 port |
| IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGON OSD GPS NAVIGATION SYSTEM COMBO
| Voltage | 2 ports |
| Current | 1 port |
| IMU | Artificial horizon |
Details:, The Dragon OSD+ v2 is the newest analog OSD from DragonLabs., :, , GPS:, Altitude, Ground speed, Coordinates, Satellites, Track heading, Home heading, LOS Distance, Distance to home, Barometer:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, : Magnetic heading and GPS, : Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, : Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Way points:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), Package includes:, , Optional accessories not included:, , Software/Firmware and Manual:,
It provides a light and low cost board, but high ...HobbyWireless
DRAGONLINK V2 - COMPLETE LONG RANGE SYSTEM FOR RADIO CONTROL
Details:, , Note:, No license is required to purchase it, however in order to legally operate within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The Dragonlink became one of the most popular long range ...HobbyWireless
FPV RECORDER WITH BUILT-IN LCD (HIGH RECORDING QUALITY AND NEVER GOES TO BLUE SCREEN).
| Video compressed format | MPEG , files format |
| Photo format | JPG |
| High Resolution LCD | 2.5", TFT true color LCD |
| Audio and video output | RCA 3-in-1 AV output |
| Storage type | SD card |
| Video size and speed | PAL |
| Power supply for external camera is available | Voltage |
| Video format | NTSC/PAL; |
| Multi record mode | Manual/Auto/Motion detection/ for different scenarios; |
| Recording time | 15minute~2.5 hours /1G |
| Power consumption | 200mA |
| Size | 90 mm x 59 mm x23 mm |
| Weight | 100g (including battery) |
Details:, Hobby Wireless proudly introduce the VR1500, very identical to PV500 recorder., Note:, Cheap and slow speed SD cards are prone to cause lockups., Specifications:, , Includes:, VR1500 Recorder,
It was developed with customized firmware for FPV, and it ...HobbyWireless
TX-V313 300MW 1.3 GHZ PLUG AND PLAY TRANSMITTER ONLY.
| (CH1 | 1240 MHz) |
| (CH2 | 1280 MHz) (Only channel 2 is available if shipped to USA) |
| (CH3 | 1320 MHz) |
| (CH4 | 1360 MHz) |
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, , Channels:, , Features:, * 300mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...